Canon imagePROGRAF iPF8300S Basic Guide No.2 Basic Manual page 48

Error Messages
Error Message
Paper position not suitable for
borderless printing.
Cause
Because paper expands or
contracts depending on the
environment of use, it may
become narrower or wider than
the supported width for borderless
printing.
The paper is loaded askew.
48
Corrective Action
Press ▲ or ▼ to select Stop Printing , and then press
the OK button to stop printing.
Use each type of paper only where the recommended
environmental conditions are met. For details on
environmental conditions for various paper, see the
Paper Reference Guide .
(→"Types of Paper," User's Guide)
Select None when you have set Detect Mismatch in
the Control Panel menu to Warning .
However, note that this error may affect the printing
quality.
Press ▲ or ▼ to select Change Paper and straighten
the paper so that the edges are between the ink
grooves for borderless printing.
Insert the roll firmly until it touches the flange of the
Roll Holder .
(→ , Attaching the Roll Holder to Rolls)
Select None when you have set Detect Mismatch in
the Control Panel menu to Warning .
However, note that this error may affect the printing
quality.
Press ▲ or ▼ to select Print With Border , and
then press the OK button to continue printing. The
document will be printed with a border.
Press ▲ or ▼ to select Stop Printing , and then press
the OK button to stop printing.