If roll paper jams, follow the steps below to remove jams.
1
Turn the printer off.
(→"Turning the Printer On and Off," User's Guide)
2
Open the Top Cover .
•
If the leading edge of the roll jams in the carriage such as when the paper curls strongly, you may be
able to avoid paper jamming by setting the roll cutting method to Manual and setting the detection of
paper leading edge to [Off].
(→"Specifying the Cutting Method for Rolls," User's Guide)
3
If the Carriage is out, move the Carriage out of the way,
away from the paper.
•
If you push the Carriage to the left edge, the blade of the Cutter Unit will be lowered in preparation to
cut the paper. Be careful not to pinch your fi ngers between the Carriage and Platen if you have pushed
the Carriage to the left edge or if a paper jam occurs during cutting.
4
Lift the Release Lever .
If Roll Paper Jams
Clear jammed roll paper as follows.
20
Need help?
Do you have a question about the imagePROGRAF iPF8300S Basic Guide No.2 and is the answer not in the manual?
Questions and answers