Error Messages
Respond to error messages as follows.
Error messages
Check the message and take the appropriate action.
•
Before borderless printing, move the blue platen switch.
•
Blue platen switch is dirty.
•
Borderless printng not possible.
•
Borderless printng not possible. Paper stretched or shrank.
•
Calibration There is a problem with the multi-sensor.
•
Cannot adjust paper feed.
•
Cannot adjust printhead.
•
Cannot calibrate.
•
Cannot cut this paper.
•
Cannot execute this command. Use other paper.
•
Cannot feed paper.
•
Check printed document.
•
Close Ink Tank Cover
•
End of paper feed.
•
ERROR Exxx-xxxx (x represents a letter or number)
•
Excessive temperature or humidity.
•
Execute printhead cleaning.
•
File read error.
•
GARO Wxxxx (x represents a number)
•
Hard disk error.
•
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
•
Ink insuffi cient.
•
Ink tank is empty.
•
Insuffi cient paper for job
•
Mail box full. Delete unwanted data
•
Mail box full. Now printing without saving data.
•
Mail box nearly full.
•
Maint. cart. The level is low
•
Maintenance cartridge full.
•
Maintenance cartridge problem.
•
Maximum jobs stored.
•
Media take-up unit ready.
•
MediaType Mismatch
•
Move the blue platen switch No.xx to the right. (xx represents a number)
•
Multi-sensor error
•
No ink left.
•
No ink tank loaded.
•
No maintenance cartridge.
•
No Maintenance Cartridge capacity.
•
No sheets.
•
No x printhead (x is L, R, or not displayed)
•
Not much ink is left.
•
Paper loaded askew.
•
Paper mismatch
•
Paper position not suitable for borderless printing.
•
Paper size not detected.
33