Canon imagePROGRAF iPF8300S Basic Guide No.2 Basic Manual page 21

5
Holding the paper on both sides, pull the jammed portion
out toward the front. Use scissors or a cutting tool to cut
away the printed or wrinkled portion.
6
If the Carriage is on the left, move the Carriage to the
right until it stops.
• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur
when you turn on the printer.
7
Hold the edge of the roll paper in the middle as you
gently pull it evenly to the position of the Ejection Guide
(a). Align the right side of the roll paper with the Paper
Alignment Line (b), keeping this side parallel to the line,
and then lower the Release Lever .
• Do not force the roll paper into alignment with the Paper Alignment Line (b). This may prevent the
paper from being advanced straight.
8
Close the Top Cover .
9
Turn the printer on.
(→"Turning the Printer On and Off," User's Guide)
The roll is now advanced. After it is fi nished being
advanced, you can resume printing.
• For a neater edge, cut the edge of the paper.
(→"Specifying the Cutting Method for Rolls," User's Guide)
a
21
If Roll Paper Jams
b