Table of Contents
Advertisement
Pronar PT610
• changing bulbs
ATTENTION
Do NOT travel with out of order lighting system. Damaged lamp lenses, and burned-out
bulbs must be replaced immediately before travelling. Lost or damaged reflective lights
must be replaced.
Required maintenance actions
Connect trailer to tractor with appropriate connection lead.
Check completeness and technical condition of trailer lights.
Check completeness of all reflectors.
Check correct mounting of the slow-moving vehicle warning sign holder.
Before driving on to public road, check that the tractor is equipped with a
warning reflective triangle.
Checking technical condition of electrical system:
TIP
Before driving off, make certain that all lamps and reflective lights are clean.
5.5.2
REPLACEMENT OF BULBS
Compatible bulbs are shown in table (5.3). All light lenses are secured by screws and it is not
necessary to dismantle whole lamp or trailer subassemblies.
Check if the connection lead is reliable. Check connection sockets in
tractor and trailer.
• each time while connecting the trailer.
5.26
SECTION 5
Advertisement
Table of Contents
