7-segment LED
The network connection status, servo status, and alarm/warning occurrence statuses can be checked on the 7-segment LED
display.
Display sequence
The following shows the display sequence of the 7-segment LED display after power-on. Once a system check is complete
and the servo amplifier is started, the network connection status will be displayed.
Servo amplifier power on
Controller power on
(Network communication start)
*1
Controller power off
*1 The last two digits indicate the axis No. set with the rotary switches.
3 STRUCTURE
40
3.2 Switch setting and display of the servo amplifier
Controller not connected
Controller not connected
(Initialization communication in progress)
Controller is connected
Controller is shut off