7-segment LED
The network connection status, servo status, and alarm/warning occurrence statuses can be checked on the 7-segment LED
display.
Display sequence
The following shows the display sequence of the 7-segment LED display after power-on. Once a system check is complete
and the drive unit is started, the network connection status will be displayed.
■For CC-Link IE TSN
Drive unit power on
Controller power on
(Network communication start)
*1
Controller power off
*1 The segment of the last 2 digits shows the IP address.
Page 39 When the network is connected
■For CC-Link IE Field Network Basic
Drive unit power on
Controller power on
(Network communication start)
*1
Controller power off
*1 The segment of the last 2 digits shows the IP address.
Page 39 When the network is connected
3 STRUCTURE
38
3.2 Switch setting and display of the drive unit
Controller not connected
Controller not connected
(Initialization communication in progress)
Controller is connected
Controller not connected
Controller is connected