User Information; Storage And Transfer; Described Product; Timeliness - Pilz Intern PMC SR6 Manual

User information

2 User information
This documentation provides all information on the intended use of the drive controller in combination
with the PMC SR6 safety module.
2.1

Storage and transfer

As this documentation contains important information for handling the product safely and efficiently, it
must be stored in the immediate vicinity of the product until product disposal and be accessible to
qualified personnel at all times.
Also pass on this documentation if the product is transferred or sold to a third party.
2.2

Described product

This documentation is binding for:
Drive controllers of the PMC SC6 or PMC SI6 series in combination with the PMC SR6 safety module
and DriveControlSuite (DS6) software in V 6.4-E or later and associated firmware in V 6.4-E or later.
2.3

Timeliness

Check whether this document is the most up-to-date version of the documentation. We make the
latest document versions for our products available for download on our website:
https://www.pilz.com/en-INT.
2.4

Original language

The original language of this documentation is German; all other language versions are derived from
the original language.
2.5

Limitation of liability

This documentation was created taking into account the applicable standards and regulations as well
as the current state of technology.
No warranty or liability claims for damage shall result from failure to comply with the documentation or
from use that deviates from the intended use of the product. This is especially true for damage
caused by individual technical modifications to the product or the project configuration and operation
of the product by unqualified personnel.
Manual PMC SR6 safety module
1005344-en-US-01
Intern
Pilz | 5