Using Epson Print Enabler - Epson WorkForce WF-2860DWF User Manual

User's Guide
Important:
c
❏ Make sure that the Wi-Fi Direct (Simple AP) connection setting is enabled.
❏ Enable the NFC function on your smart device.
❏ Make sure that Epson iPrint is installed on your smart device. If not, touch the NFC antenna of the smart device
to the printer's NFC tag and install it.
Note:
❏ If the printer does not communicate with the smart device even after touching it to the tag, try adjusting the position of
the smart device and touch it to the tag again.
❏ If there are obstacles such as metal between the printer's NFC tag and the NFC antenna of the smart device, the printer
may not be able to communicate with the smart device.
❏ This feature uses a Wi-Fi Direct (Simple AP) connection to connect to the printer. You can connect up to four devices to
the printer at the same time.
❏ If you have changed the password for the Wi-Fi Direct (Simple AP) connection, you cannot use this feature. Restore the
initial password to use this feature.
1. Load paper in the printer.
2. Touch the NFC antenna of your smart device to the printer's NFC tag.
Epson iPrint starts.
3. On the Epson iPrint home screen, touch the NFC antenna of your smart device to the printer's NFC tag again.
The printer and the smart device are connected.
4. Select the image you want to print, and then select Next at the top right of the screen.
5. Touch the NFC antenna of your smart device to the printer's NFC tag again.
Printing starts.

Using Epson Print Enabler

You can wirelessly print your documents, emails, photos, and web pages right from your Android phone or tablet
(Android v4.4 or later). With a few taps, your Android device will discover an Epson printer that is connected to
the same wireless network.
1. Load paper in the printer.
2. Set up your printer for wireless printing.
Printing
92