Table of Contents
Advertisement
User's Guide
Setting Up Remote Receive
1. Select Settings on the home screen.
2. Select General Settings > Fax Settings > Basic Settings > Remote Receive.
3. Tap Remote Receive field to set this to On.
4. Select Start Code, enter a two digit code (you can enter 0 to 9, *, and #), and then tap OK.
5. Select OK to apply the settings.
Related Information
"Basic Settings" on page 145
&
Using Remote Receive
1. When the telephone rings, pick up the handset.
2. When you hear a fax tone, enter the start code using the telephone.
3. After confirming that the printer has started receiving the fax, hang up the handset.
Receiving Faxes by Polling (Polling Receive)
You can receive a fax stored on another fax machine by dialing the fax number. Use this feature to receive a
document from a fax information service. However, if the fax information service has an audio guidance feature
that you need to follow to receive a document, you cannot use this feature.
Note:
To receive a document from a fax information service that uses audio guidance, just dial the fax number using the connected
telephone, and operate the phone and the printer following the audio guidance.
1. Select Fax on the home screen.
2. Tap
.
3. Tap Polling Receive to set this to On, and then tap Close.
4. Enter the fax number.
Note:
When Security Settings > Direct Dialing Restrictions is set to On, you can only select fax recipients from the contact
list or the sent fax history. You cannot manually enter a fax number.
x
5. Tap
.
Related Information
"Sending Faxes Dialing from the External Phone Device" on page 124
&
Faxing
129
Advertisement
Table of Contents
