Faxes Are Sent At The Wrong Size; Received Fax Quality Is Poor; Received Faxes Are Not Printed; Pages Are Blank Or Only A Small Amount Of Text Is Printed On The Second Page In Received Faxes - Epson WF-2810 Series User Manual

User's Guide

Faxes Are Sent at the Wrong Size

❏ When sending a fax using the scanner glass, place the original correctly aligning its corner with the origin mark.
Select your original size on the control panel.
❏ Clean the scanner glass and the document cover. If there is dust or stains on the glass, the scanning area may
extend to include the dust or stains, resulting in the wrong scanning position or small images.
Related Information
"Fax Send Settings" on page 128
&
"Placing Originals" on page 49
&
"Cleaning the Scanner Glass" on page 152
&

Received Fax Quality Is Poor

❏ Enable the ECM setting on the control panel.
❏ Contact the sender and ask them to send using a higher quality mode.
❏ Reprint the received fax. Select Fax > Menu > More > Reprint Faxes to reprint the fax.
Related Information
"More" on page 129
&
"Basic Settings Menu" on page 72
&

Received Faxes Are Not Printed

If an error has occurred on the printer, such as a paper jam, the printer cannot print received faxes. Check the
printer.
Related Information
"Checking the Printer Status" on page 166
&
"Removing Jammed Paper" on page 168
&
Pages are Blank or only a Small Amount of Text is Printed on the
Second Page in Received Faxes
You can print on one page by using the Delete Print Data After Split feature in Split Page Settings.
Select Delete Top or Delete Bottom in Delete Print Data After Split, and then adjust Threshold. Increasing the
threshold increases the amount deleted; a higher threshold gives you a higher possibility of printing on one page.
Related Information
"Receive Settings Menu" on page 73
&
Solving Problems
196