Table of Contents

Advertisement

Service and maintenance
86

Engine

1
2
Engine
Checking the engine oil level
Check the engine oil level every 10 operating hours.
1 Stand the machine on level ground.
2 Pull out dipstick (1) and wipe it clean with a lint-free cloth, rein-
3 The oil level should reach the upper mark (MAX).
4 If the oil level is near or even below the bottom mark (MIN), top
Changing the engine oil
Oil change intervals acc. to the number of operating hours,
but at least once per year
Type
EC35
EC45
1016525
IMPORTANT! Change the oil at operating temperature and
with the engine shut down.
Hot oil – danger of scalding!
Catch running out oil and dispose of environmentally.
1 Unscrew the drain plug and let the old oil drain out.
2 Turn the drain plug back in with a new seal ring.
1011190
3 Fill new oil in through filler neck (2), until it reaches the top dip-
Oil filling capacity in case of oil change with filter (oil quality
see table of fuels and lubricants on page 107).
Type
EC35
EC45
4 Check the oil level after a short test run (approx. 2 minutes at
2
1016524
sert it until it bottoms and pull it back out.
up oil immediately to avoid severe engine damage (for quality
of oil refer to the table of fuels and lubricants, page 107).
Operating hours
1. Service after 100h, then every 500h.
1. Service after 100h, then every 500h.
WARNING!
stick mark (MAX).
Filling capacity
8 litre
8 litre
low idle), if necessary fill up to the top mark.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ec45

Table of Contents