Nominal Lifting Loads Ec45 - Volvo EC35 Operator's Manual

Specifications
128

Nominal lifting loads EC45

L
Kg
5m
4m
3m
Z2
2m
1m
Z1
0m
-1m
Z3
-2m
X
3m 2m
5m 4m
OK
1012173
X(m)
L:
1.40m
A
L:
1.70m
Z2
____________________________________________________________________________________
L:
Z1
____________________________________________________________________________________
1.40m
Z3
B
Z2
____________________________________________________________________________________
L:
Z1
1.70m
____________________________________________________________________________________
Z3
Nominal lifting loads EC45
Nominal lifting loads Europe
Nominal lifting loads in kg, i.e. 75% of the tipping load or 87% of
the hydraulic limit. These loads apply for the complete height (Z.)
A
and for the specified reach. Increase of loads by 3% for steel
tracks, except the marked values (* = hydraulic limits).
1011326
360¡
A
The specified values are valid for a machine:
– without attachment and without quick coupling.
B
NOTE! If handling is accomplished in lifting gear operation
the weight of the attachments must be subtracted from the va-
lues stated in the table
– On level and firm ground
– With rubber tracks.
1m 0m
– Equipment during full rotation.
1011322
– Equipment parallel to the axis of the superstructure.
– With a 75 kg driver in the cab.
> 1.5 2
Z2
____________________________________________________________________________________
Z1 1690* 1825
____________________________________________________________________________________
Z3 2515* 1840
____________________________________________________________________________________
Z2
____________________________________________________________________________________
Z1 1530* 1650*
____________________________________________________________________________________
Z3 2150* 1805
1690* 1755
2515* 1770
1530* 1650*
2150* 1730
WARNING!
The transport of objects in lifting gear operation is prohib-
ited if the machine is not equipped with a "Safety" Kit,
which is optionally available and includes the following:
a safety valve on the boom,
a load safety device (see switch in instrument panel),
a table stating the nominal loads for lifting gear ope-
ration, fastened inside the operator's stand.
The assembly of the "Safety" Kit must only be carried out by
an authorized person.
WARNING!
Lift objects only with the lifting tackle provided for this pur-
pose, which consists of a lifting eye (A) between both
sides.
2.5 3 3.5
1165* 805* 735*
1290 1000 815
1305 1005 815
1320* 830* 625*
1275 985 800
1280 985 800
1165* 810* 735*
1240 960 810
1255 965 785
1320 830* 810
1220 945 765
1230 945 765
4 4.5 4.9
700 595
680 585
690
675* 590
670 575 515
670
675 571
655 563
660
670 565
640 550 490
640
1011320