Nominal Lifting Loads Ec35 - Volvo EC35 Operator's Manual

Specifications
126

Nominal lifting loads EC35

L
Kg
5m
4m
3m
Z2
2m
1m
Z1
0m
-1m
Z3
-2m
X
4m 3m 2m
5m
OK
X(m)
L:
1.40m
A
L:
1.70m
L:
1.40m
B
L:
1.70m
Nominal lifting loads EC35
Nominal lifting loads Europe
Nominal lifting loads in kg, i.e. 75% of the tipping load or 87% of
the hydraulic limit. These loads apply for the complete height (Z.)
A
and for the specified reach. Increase of loads by 3% for steel
tracks, except the marked values (* = hydraulic limits).
1011325
360¡
A
The specified values are valid for a machine:
– without attachment and without quick coupling.
B
NOTE! If handling is accomplished in lifting gear operation
the weight of the attachments must be subtracted from the va-
lues stated in the table
– On level and firm ground
– With rubber tracks.
0m
1m
– Equipment during full rotation.
1011322
– Equipment parallel to the axis of the superstructure.
– With a 75 kg driver in the cab.
1012173
> 1.5 2
Z2
____________________________________________________________________________________
Z1 1555* 1190
____________________________________________________________________________________
Z3 2040* 1215
Z2
____________________________________________________________________________________
Z1 1395* 1175
____________________________________________________________________________________
Z3 1945* 1190
Z2
____________________________________________________________________________________
Z1 1465* 1100
____________________________________________________________________________________
Z3 1950* 1120
Z2
____________________________________________________________________________________
Z1 1305* 1085
____________________________________________________________________________________
Z3 1855* 1100
WARNING!
The transport of objects in lifting gear operation is prohib-
ited if the machine is not equipped with a "Safety" Kit,
which is optionally available and includes the following:
a safety valve on the boom,
a load safety device (see switch in instrument panel),
a table stating the nominal loads for lifting gear ope-
ration, fastened inside the operator's stand.
The assembly of the "Safety" Kit must only be carried out by
an authorized person.
WARNING!
Lift objects only with the lifting tackle provided for this pur-
pose, which consists of a rod (A) between both sides.
2.5 3 3.5
955 720 570
845 655 530
855 660 535
730 575
835 645 520
840 645 520
895 675 538
785 615 498
795 615 503
685 543
775 605 488
780 605 488
4 4.5 4.8
465
445 380
465 385
435 370 340
435
440
415 355
440 365
410 350 320
410
1011323