Section 9: Device Descriptor; Procedure For Adding Dd To Ams And 375/475 - Emerson HART CAM216 Instruction And Operation Manual

CAM216/16 IOM
Doc. Number: ECM-402-0116
Section 9: Device Descriptor (DD)
NOTE:
To download the DD for non-Emerson 3rd party host, please refer to the HART Foundation
website:
To download the DD for Emerson hosts, please refer to:
do a search for "device install kit", then follow the steps.
9.1

Procedure for Adding DD to AMS and 375/475

Steps for installing stand-alone AMS:
Before we add DD to AMS, we need to configure HART Modem on AMS. (Ensure that HART
Modem drivers are already installed before configuring Modems on AMS). Follow steps as
stated below:
Network Configuration:
1.
Figure 35
2.
Figure 36
Device Descriptor (DD)
http://en.hartcomm.org/
Open Start> All Programs> AMS Device Manager> Network Configuration
Network Configuration Window
Click on Add and select Network Component Type:
For HART device: HART Modem
Select Network Component Type
and navigate to the Product Catalog.
http://www.emersonprocess.com
Section 9: Device Descriptor (DD)
January 2016, Rev. 1
and
45