MacDon M155 Unloading And Assembly Instructions page 134

7. Rotate operator's seat to engine-forward mode.
8. Switch ROAD lights (B) ON and check that all lights are
functioning as shown at right.
9. Activate HIGH/LOW (A) switch and check lights.
10. Activate turn signals and hazard warning lights with
switches on CDM and then check lights.
169885
PERFORMING PREDELIVERY CHECKS
128
Figure 7.28: Front: Cab-Forward Mode
A - High/Low Road Lights
B - Turn Signals, Hazard Warning Lights—Amber
Figure 7.29: Rear: Cab-Forward Mode
A - Turn Signals, Hazard Warning Lights—Amber
B - SMV Sign
Figure 7.30: Exterior Light Switches
C - Tail Lights—Red (If Installed)
Revision A