SuperServer SYS-2029U-TN24R4T User's Manual
1.4 Chassis Features
Control Panel
Power switches and status LEDs are located on the control panel on the front of the chassis.
Item
Features
1
Power button
2
Reset button
3
Power LED
4
NIC LED
5
Power Fail LED
6
HDD LED
7
NIC LED
8
Information LED Alerts operator to several states, as noted in the table below
Status
Continuously on and
red
Blinking red (1Hz)
Blinking red (0.25Hz)
1
2
3
4
5
Figure 1-1. Control Panel
Control Panel Features
Description
The main power switch applies or removes primary power from the power supply to
the server but maintains standby power.
Reboots the system.
Indicates power is being supplied to the system power supply units. This
LED is illuminated when the system is operating normally.
Indicates network activity on LAN2 when flashing.
Indicates a power supply module has failed.
Indicates activity on the hard drive when flashing.
Indicates network activity on LAN1 when flashing.
Information LED
Description
An overheat condition has occurred.
(This may be caused by cable congestion.)
Fan failure, check for an inoperative fan.
Power failure, check for a non-operational power
supply.
10
6
7
8