Supermicro SuperServer SYS-2029U-TN24R4T User Manual page 62

SuperServer 2029U-TN24R4T User's Manual
TPM Header
The JTPM1 header is used to connect a Trusted Platform Module (TPM)/Port 80, which
is available from Supermicro. A TPM/Port 80 connector is a security device that supports
encryption and authentication in hard drives. It allows the motherboard to deny access if the
TPM associated with the hard drive is not installed in the system.
Internal Speaker/Buzzer
The Internal Speaker/Buzzer (SP1) is used to provide audible indications for various beep
codes.
4-pin BMC External I
A System Management Bus header for IPMI 2.0 is located at JIPMB1. Connect a cable to
this header to use the IPMB I
Chassis Intrusion
A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to the header to inform you when the chassis is opened.
Trusted Platform Module/Port 80 Header
Pin Definitions
Pin# Definition Pin#
1 P3V3 2
3 PCIE_RESET_N# 4
5 SPI_PCH_CLK# 6
7 SPI_PCH_MOSI 8
9 JTPM1_P3V3A 10
Internal Buzzer
Pin Definitions
Pin# Definition
1 Pos (+)
2 Neg (-)
C Header
2
C connection on your system..
2
External I
Pin Definitions
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection
Chassis Intrusion
Pin Definitions
Pins Definition
1 Intrusion Input
2 Ground
62
Definition
SPI_TPM_CS_N
SPI_PCH_MISO
Ground
N/A
IRQ_TPM_SPIN_N
Beep In
Alarm Speaker
C Header
2