Supermicro SuperServer SYS-2029U-TN24R4T User Manual page 119

Choose diagnostics type:
Quick diagnostics
Select Enabled to perform quick diagnostics test. The options are Disabled and Enabled.
DIMM ID 0x0001
Select Enabled to enable the diagnostics procedure for this DIMM. The options are Dis-
abled and Enabled.
DIMM ID 0x0101
Select Enabled to enable the diagnostics procedure for this DIMM. The options are Dis-
abled and Enabled.
(Additional DIMMs are listed if detected.)
Config diagnostics
Select Enabled to enable the platform configuration diagnostics test. The options are
Disabled and Enabled.
FW diagnostics
Select Enabled to enable the firmware diagnostics test. The options are Disabled and
Enabled.
Security diagnostics
Select Enabled to enable the security diagnostics test. The options are Disabled and
Enabled.
Execute tests
Press <Enter> to perform the selected diagnostic tests. The following information is
displayed.
TestName: Quick
State: Ok
Message:
The quick health check succeeded.
TestName: Config
State: Ok
Message:
The platform configuration check succeeded.
TestName: Security
State: Ok
119
Chapter 6: BIOS