Supermicro SuperServer SYS-2029U-TN24R4T User Manual page 164

SuperServer 2029U-TN24R4T User's Manual
GPUs in 2U Ultra Systems
Supermicro 2U Ultra systems support graphic processing units (GPUs) when installed with
some additional optional parts. The GPUs have cooling requirements that can be assisted
by specialized dual-level air shrouds to direct the flow from the system fans.
1
In the diagram above, slots 1, 2, 5/6, and 7/8 can be used for GPUs. Note that due to thermal
limitations, a maximum of two GPUs should normally be installed. Positions 1 and 2 cannot
be installed in the same system; the air shrouds are mutually exclusive. Position 7/8 should
only be used after consultation with Supermicro.
Slot Mechanical
1 Double-width, full-height, full-length
2 Double-width, full-height, full-length
5/6 Full-height, full-length
7/8* Full-height, full-length
*Only supported in special circumstances, in consultation with Supermicro
Optional Riser Cards
•
AOC-2UR66-i4G: Slot 1 x16 (CPU1), Slot 2 x16 (CPU1), Slot 3 N/A
•
RSC-R2UW-2E8E16: Slot 5 x16 (CPU2), Slot 7 x8 (CPU2), Slot 8 x8 (CPU2)
•
RSC-W2-66: Slot 5 x16 (CPU2), Slot 7 x16 (CPU2)
Appendix F
3
Figure F-1. Expansion Card Chassis Slots
Default Expansion Card Configurations
164
2
4
Electrical In Models
x16 (CPU1) All models
x16 (CPU1)
Depends on model
x8 (CPU1)
x8 (CPU2) All models
x8 (CPU2) All models
5
6
7
8