ProSoft Technology ICX35-HWC User Manual page 95

ICX35-HWC ♦ Industrial Cellular Gateway
3G/4G LTE
B. No Belden Horizon connection and data plan left.
This scenario is activated if:

The device is active in Belden Horizon;

The number of attempts to reach Belden Horizon are less than the
configured threshold (watchdog/percentatagefail);

Data Plan Limit and Stop Data After Plan Limit Reached are enabled;

There is data available in the Data Plan.
In this scenario, the watchdog mechanism will reboot the device at the time
interval specified (minutes). This is configurable from the local UI via the
Belden Horizon Timeout parameter.
C. No Belden Horizon connection.
This scenario is activated if:

The device is active in Belden Horizon;

The number of attempts to reach Belden Horizon are less than the
configured threshold (watchdog/percentatagefail);

Data Plan Limit is enabled and Stop Data After Plan Limit Reached is
disabled;
In this scenario, the watchdog mechanism will reboot the device at the time
interval specified (minutes). This is configurable from the local UI via the
Belden Horizon Timeout parameter.
ProSoft Technology, Inc.
Watchdog
User Manual
Page 95 of 127