Equipment Adjustments - PIETRO FIORENTINI FE Series Manual

6.5 -

EQUIPMENT ADJUSTMENTS

NOTE!
All regulators are calibrated to the values requested by the customer directly at PIETRO FIORENTINI S.p.A.
factory.
No further adjustments are required.
The calibration values are specified on the nameplate (refer to paragraph 2.8).
Adjustment
Operator qualification •
PPE required
55
Installer.
WARNING!
The PPE listed in this table is related to the risk associated with the equipment.
For the PPE required to protect against risks associated with the workplace,
installation or operating conditions, please refer to:
• the regulations in force in the country of installation;
• any information provided by the Safety Manager at the installation facility.
LOW-PRESSURE GAS REGULATOR
Use, maintenance and warning manual
Tab. 6.34.
| INSTALLATION | REV. 00
EN