Surface Treatments - PIETRO FIORENTINI FE Series Manual

Type
Excess flow, automatic
reset version

4.4.1 - SURFACE TREATMENTS

NOTE!
Surface treatments (special painting, anticorrosive treatments, galvanising,...) are foreseen for specific
needs and/or particular environmental conditions.
33
Description
This version provides to automatically reset the safety device tripped due to excess flow
(after resolving the cause that caused tripping).
NOTE!
The safety device is reset through a downstream gas discharge with a con-
trolled flow rate not greater than 15 l/h.
LOW-PRESSURE GAS REGULATOR | DESCRIPTION AND OPERATION
Use, maintenance and warning manual
Tab. 4.18.
| REV. 00
EN