Graco ProMix PD3K Plus Operation page 50

Operation Using a Programmable Logic Controller (PLC)
Write Material Material Ready Ready Flag
Write Write Material Ready
The Write Material Ready Flag command is used to signal to the PD3K+ that the upstream material management has
the appropriate component loaded at the inlet valve stack(s) of the pump(s) prior to a recipe change. This flag is
only used when multiple materials for a pump are fed to the PD3K+ via a single valve at the inlet valve stack (i.e. a
piggable system). See
NOTE: This flag should be cleared prior to or during a material change operation upstream of the inlet valve stack to
NOTE: NOTE:
avoid having the wrong material being fed into the pump during a recipe change.
Example: Setting the Material Ready Flag for Pump 1.
Parameter Description
DCS DCS DCS Register Register Register Parameter Parameter
DCS Write Material Ready Flag
Command
Argument 0 Material Ready Status
Argument 1 Pump Number
Acknowledge Command Acknowledged
Return 0 Mix Fill Set Point
Return 1 Pump Number
Read User User ID ID ID
Read Read User
The Read User ID command reads back the current User ID. See
Log and User ID. The User ID can be up to ten ASCII characters in length and is packaged as three little endian
segments of ASCII characters. No arguments are required.
Example: Read User ID that is currently "John Doe".
DCS Register Register Parameter Parameter Description Parameter
DCS DCS Register
Read User ID
DCS
Command
Acknowledge Command Acknowledged
Return 0 User ID characters [3:0]
(ASCII)
Return 1 User ID characters [7:4]
(ASCII)
Return 2 User ID characters [9:8]
(ASCII)
50
Flag
Flag
Custom Valve Mapping, page 84
Description
Description
Description Description
for more info on Single inlet valve stacks.
Data Units Value
Data Data Units Units Value Value
Type
Type Type
uint32 NONE 6
uint32 NONE 1
uint32 NONE 1
uint32 NONE 2 = ACK
uint32 NONE 1
uint32 NONE 1
Usage Screen, page
Data Data Data Units Units Units Value Value Value
Type Type Type
uint32 10
NONE
uint32 NONE 2 = ACK
uint32 NONE 0x6E686F4A = ['n',
'h', 'o', 'J']
uint32 NONE 0x656F4420 = ['e',
'o', 'D', ' ']
uint32 0x0 = [null]
NONE
Range
Range Range
0 - 19
0 := Not
Ready/No OP
1 := Material
Ready
1 - 4
0 - 4
0 := Not
Ready/No OP
1 := Material
Ready
1 - 4
65, for more details on Job
Range Range Range
0 - 19
0 - 4
N/A
N/A
N/A
3A6287E