Graco ProMix PD3K Plus Operation page 49

Write Recipe Recipe
Write Write Recipe
The Write Recipe command allows users to configure component selections of a recipe remotely. See
Recipe Screen 1, page
arguments received.
NOTE: The recipe must be enabled via the ADM before it can be loaded for mixing.
NOTE: NOTE:
Example: Configure Recipe 6 for
Parameter Description
DCS DCS DCS Register Register Register Parameter Parameter
DCS Write Recipe
Command
Argument 0 Recipe Number
Argument 1
Component A
Argument 2 Component B
Argument 3 Component C
Argument 4 Component D
Acknowledge Command Acknowledged
Return 0 Recipe Number
Return 1 Component A
Return 2
Component B
Return 3 Component C
Return 4 Component D
Return 5 Recipe Gun Assignment*
* Only used when Multiple Guns is enabled.
Write Write Fluid Write Fluid Control Fluid Control Mode Control
The Write Fluid Control Mode command allows users to remotely change Fluid Control between 'Flow' and
'Pressure'. See System Screen 6, page
the arguments received.
NOTE: NOTE: The Fluid Control mode should be changed only when the system is in Standby or when the pumps are NOTE:
powered off. Do not change Fluid Control modes during a mix operation.
Example: Change to Flow Control mode.
DCS Register Register Parameter Parameter Description Parameter
DCS DCS Register
DCS Write Fluid Control Mode
Command
Argument 0 Fluid Control Mode
Acknowledge Command Acknowledged
Return 0 Fluid Control Mode
3A6287E
76, for more details on recipes and recipe parameters. The return registers will echo the
Component A = 2, Component B = 1, Component C = 2.
Description
Description
Mode Mode
73, for more details on Fluid Control mode. The return registers will echo
Description Description
Operation Using a Programmable Logic Controller (PLC)
Data Units
Data Data Units Units
Type
Type Type
uint32 NONE
uint32 NONE
uint32
NONE
uint32 NONE
uint32 NONE
uint32 NONE
uint32 NONE
uint32 NONE
uint32 NONE
uint32
NONE
uint32 NONE
uint32 NONE
uint32 NONE
Data Data Data Units Units Units Value Value Value
Type Type Type
uint32 3
NONE
uint32 NONE 0 = Flow Mode
uint32 NONE 2 = ACK
uint32 NONE 0
Value
Value Value
2
6
2
31
40
N/A
2 = ACK
6
2
31
40
N/A
1
Range Range Range
0 - 19
0 = Flow
1 = Pressure
0 - 4
0 = Flow
1 = Pressure
Range
Range Range
0 - 19
0 - 40
0 – 30
0, 31 – 38
0, 39 - 46
0, 47 - 54
0 - 4
0 - 40
0 – 30
0, 31 – 38
0, 39 - 46
0, 47 - 54
1 - 3
49