Graco ProMix PD3K Plus Operation page 111

Calibration Calibration Errors Calibration Errors Errors
NOTE: NOTE: In some error codes listed below, a # symbol is shown as the last digit. This symbol represents the applicable NOTE:
component number, which can vary. The unit's display will show the applicable number as the last digit in the
code. For example, the ENT# code listed in this table will be displayed as ENT1 if the affected component is pump
1, ENT2 for pump 2, and so on.
Code Type
Code Code Type Type
END# Record
ENS0 Record
ENT# Record
3A6287E
Name
Name Name
Calibration Pump #
Calibration Solvent Meter
Calibration Stall Test Pump # A stall test was completed successfully on
Description
Description Description
A calibration test was run on the pump.
A calibration test was run on the solvent
meter.
pump #.
System Errors
111