Renkforce 751781 Operating Instructions Manual page 53

Programming the opening sound
81 1
81 0
Programming the access mode (multi-user mode only)
82 1
82 0
Note: In single user mode, the user code and the master code must be 4 digits long.
Programming the key tones
83 1
83 0
Door delay alarm
9 0
9 1 to 999
# When an output (relay) is activated, the device produces an
opening sound for 1 second. This can occur through the ent-
ry of a user code or via operation of an "Open" button. This
feature is very useful when the operation of the door opener
is inaudible (e.g. DC operated).
# No opening sound. Only the conformation sound when ente-
ring codes is generated.
# Auto mode (default setting). The # key does not need to be
pressed after the code has been entered. However, the user
code must have the same number of digits as the master
code.
# Manual mode. The # key must be pressed to activate the
code lock. The user code can have between 4 and 8 digits,
regardless of the length of the master code.
# The key tone is generated each time a key is pressed
# All key tones are switched off.
# The door delay alarm is switched off.
# Once the connection between the terminals (4(-)) ground and
"DOOR SENS"(3) is opened and the programmed time (1 to
999 seconds) has expired, the alarm will sound until the con-
nection between the two terminals is restored.
53