Renkforce 751781 Operating Instructions Manual page 46

Connection example 2
Door lock with alarm system
In this example the green LED (line 3/4) and the red LED (line 5/6) are used as a status
display for the alarm system.
Relay output 2 is used for controlling the alarm system. Please read the operating
manual of your alarm system to determine what type of contact (NO/NC) you require.
Connect the sabotage contact (line 1/2) to a 24 h alarm loop using an "NC" contact.
Connection of line 12 (output 3) and 13 (access control) can be used optionally. User
code 3 can deactivate the switching feature of the code lock (e.g. at night, outside
normal office hours). Programming is carried out in mode "61". When the function is
active, the red "AUX" LED lights up.
Connect line 15 to the minus (GND) connection of the alarm system.
When access control is activated, make sure that no-one is in any of the
locked rooms or buildings, because all switching functions are disabled for
the period that access control is activated.
46