Renkforce 751781 Operating Instructions Manual page 45

Connection example 1
Door lock with access control
To avoid electrostatic discharge, always connect line 15 of the connector strip to a
ground contact.
The green LED lights up when the door opener is operated.
Connection of line 12 (output 3) and 13 (access control) can be used optionally. User
code 3 can deactivate the switching feature of the code lock (e.g. at night, outside
normal office hours). Programming is carried out in mode "61". When the function is
active, the red LED lights up.
When access control is activated, make sure that no-one is in any of the
locked rooms or buildings, because all switching functions are disabled for
the period that access control is activated.
45