Table of Contents
Advertisement
7. The AV38 will update the span calibration in the sensor per the calculated value for saturated air
8. If an error occurs during calibration that causes the procedure to fail, the reason for the failure
9. After the calibration point has been stored, the AV38 will return to the calibration menu. The
10. Place the sensor back into the sample chamber and resume process flow through the
Thermo Scientific AquaSensors
using the recorded air pressure and measured temperature. During this time, the calibration
procedure can be aborted by pressing the ESC key.
MENU
will be shown.
user has the option of repeating the procedure if desired. If not, press the ESC key to exit the
menus and return to normal operations.
MENU
AquaTrace system.
™
AquaTrace
Air
Calibrating...
ESC
ENTER
≡Calibrate
►Air
ESC
ENTER
™
Trace DO System User Guide
▲
◄
►
▼
▲
◄
►
▼
21
Advertisement
Table of Contents
