Remote Control Of - DSC LE4020 Installation Manual

LE4020/LE4020CF Installation Manual
3. Set up the zone on the security panel as momentary or maintained arming.
If the security panel uses momentary key switching, configure the communicator PGM with a
l
time field of 05. In this configuration, both arm and disarm generate the pulse.
If the security Panel uses maintained key arming, configure the communicator PGM with a time
l
field of 00.
4. Optionally, the panel arm state can be configured for the communicator to detect by setting a panel
PGM output to reflect panel arm state and having a relay connected to a communicator zone configured
to follow panel arm state.
5.11.2 Remote Control of PGM
1. Set up one or more PGM outputs to Remote Control PGM configuration. A PGM can be latched or
timed:
setting the PGM timer to 00 causes it to be latched. The PGM will not turn off unless the turn
l
off command is received.
setting the PGM timer to a value between 1 and 255 seconds causes it to be timed. The PGM
l
activates for the programmed duration.
2. Via C24 Communications, program the phone number and access code used for SMS command and con-
trol.
Up to 6 different phone numbers can be programmed to perform SMS command and control.
l
The password can be 4 to 8 alphanumeric characters and is not case sensitive.
l
The SMS command and control can be sent in the following format:
For arming/disarming the Security Panel
Arm <access code>, example Arm 12345678
For activating/deactivating a specific PGM
Activate <PGM #> <access code>, Activate 1 12345678
The following SMS command and control operations are available:
Arming
Language Command Label (must not be case sensitive)
English Arm
French Armement
Spanish Armado
Disarming
Language Command Label (must not be case sensitive)
English Disarm
French Desarmement
Spanish Desarmado
Activate PGM
Language Command Label (must not be case sensitive)
English Activate
French Activation
Spanish Activar
20