HP Brio BA200 User Manual page 82

Appendix A The Error Codes
1000h – 10FFh: Multiple Processor Error Codes
Code
100Eh CPU speed error.
100Fh CPU count error.
1010h Configuration access mechanism test
failed.
1011h TagRAM control register read failed.
1012h TagRAM control register write failed.
1013h Value read back from TagRAM control
register is not the same as the value
written.
1014h L2 cache commands test failed.
70
Explanation
English
Details/Parts to Check
Processor speed error.
Check processor Speed stamp and clocks.
If the error persists, install new processor.
Processor error.
Check number of processors present.
Check processor, L2 cache and main memory are
correctly installed.
If problem persists, install new:
L2 memory (if installed in accessory slot), or
•
processor (if integrated on the processor card).
•
Check processor, L2 cache and main memory are
correctly installed.
If problem persists, install new:
L2 memory (if installed in accessory slot), or
•
processor (if integrated on the processor card).
•
Check processor, L2 cache and main memory are
correctly installed.
If problem persists, install new:
L2 memory (if installed in accessory slot), or
•
processor (if integrated on the processor card).
•
Check processor, L2 cache and main memory are
correctly installed.
If problem persists, install new:
L2 memory (if installed in accessory slot), or
•
processor (if integrated on the processor card).
•
Check processor, L2 cache and main memory are
correctly installed.
If problem persists, install new:
L2 memory (if installed in accessory slot), or
•
processor (if integrated on the processor card).
•