HP Brio BA200 User Manual page 90

Appendix A The Error Codes
9640h – 966Ch: Hard Disk Error Codes
Code
9665h No bootable partition (BST).
9666h Bad cable detected (BST).
9667h Bad cable detected (AST).
9669h Password protected hard disk (BST).
964Ah Hard disk damaged by shock (BST).
964Bh Hard disk damaged by shock (AST).
964Ch Bad low-level format (BST).
78
Explanation
English
Details/Parts to check
Hard disk error. Logical information held on the disk
appears to be incorrect. This does not necessarily mean
that a hardware error has been detected. This error will
appear if you are using a boot utility or non-standard OS
boot loader.
Run the Advanced Tests on this hard disk drive to fully
test the media. If no error occurs and you experience
problems during boot or while accessing files, it is likely
that there is a logical problem on the disk. Reformat the
disk and reinstall the operating system and applications.
Check that the IDE cable is connected correctly.
Check that the IDE cable is connected correctly.
Hard disk error. The hard disk drive is password
protected. The test cannot be run.
To test the hard disk drive, remove the password
protection.
Hard disk error. The hard disk drive needs replacement.
Hard disk error. The hard disk drive needs replacement.
Hard disk error. Low level formatting (from SCSI utilities)
has not been completed. The hard disk is unusable. Run
the SCSI utilities from the SCSI boot menu and re-
format the HDD. Wait for completion. Do not interrupt.
Do not turn off your computer. It may last several hours
depending on your PC and the hard disk size.
When low level formatting is finished, create the
partition(s), format the HDD and install OS and
applications.