HP Brio BA200 User Manual page 59

Code
01A3h L2 cache commands test failed.
01A4h L2 cache read/write test failed.
01B0h The pattern written at XXXXXXXX
YYYYYYYYh was qqqqh. The pattern
read back from that address was pppph.
01B1h Parity failure at XXXXXXXX YYYYYYYYh
during pattern test.
01B2h The pattern written at XXXXXXXX
YYYYYYYYh was qqqqh. The pattern
read back from that address was pppph.
01B3h Data bus test failed.
Explanation
0100h – 01FFh: Memory Error Codes
Details/Parts to Check
Cache memory error.
If problem persists, install new:
L2 memory (if installed in accessory slot), or
•
processor (if integrated on the processor card).
•
Cache memory error.
If problem persists, install new:
L2 memory (if installed in accessory slot), or
•
processor (if integrated on the processor card).
•
Memory error. Run the test disabling the cache.
If problem persists, install new memory module.
If problem persists, install new system board.
Memory error. Replace appropriate memory module.
Memory error. Replace appropriate memory module.
Replace memory module.
Appendix A The Error Codes
English 47