1200H - 12Ffh: Ti Card Bus Test Error Codes - HP Brio BA200 User Manual

Appendix A The Error Codes
1200h – 12FFh: TI Card Bus Test Error Codes
Code
1082h No extended memory available from
HIMEM.SYS.
1083h No extended memory detected.
1200h – 12FFh: TI Card Bus Test Error Codes
Code
1201h Unable to assign memory space.
1202h Register read write failed.
1203h Power down failed.
1205h Unable to apply correct Vcc to the card.
1206h Card detect pins not functioning.
1207h Unable to configure the card.
72
Explanation
Explanation
English
Details/Parts to Check
Unload HIMEM.SYS or programs using HIMEM.SYS.
Install the extended memory to be tested.
Details/Parts to check
Try removing some ISA/PCI cards and re-run the
diagnostic test.
Replace the controller. If it is integrated on the
system board, replace the system board.
Replace the controller. If it is integrated on the
system board, replace the system board.
Try changing PC Card.
Try changing PC Card.
Check if the PCI Card bus bridge has been initialized
properly.