HP Brio BA200 User Manual page 61

Code
030Ah Bad sector flag detected.
0310h CRC or ECC data error in sequential test.
0311h ECC-corrected data error.
0321h Change line not working.
0322h Floppy Speed Error Drive.
0340h Seek operation failed in sequential test.
0341h Undefined or invalid command in random
test.
0342h Address mark not found in random test.
0344h Requested sector not found in random
test.
Explanation
0300h – 03FFh: Floppy Disk Error Codes
Details/Parts to Check
Diagnostic test error.
Re-run the diagnostic tests.
Diagnostic test error.
Re-run the diagnostic tests.
Diskette error.
Replace diskette.
Floppy disk drive error.
Check your floppy disk drive is installed correctly.
If error persists, install new floppy disk drive.
Floppy disk drive error.
Check your floppy disk drive is installed correctly.
If error persists, install new floppy disk drive.
Floppy disk drive or floppy disk controller error.
Check your floppy disk drive is installed correctly.
Install new floppy disk drive.
If error persists, install new system board.
Floppy disk drive or floppy disk controller error.
Check your floppy disk drive is installed correctly.
Install new floppy disk drive.
If error persists install new system board.
Floppy disk drive error.
Check your floppy disk drive is installed correctly.
If error persists, install new floppy disk drive.
Floppy disk drive error.
Check your floppy disk drive is installed correctly.
If error persists, install new floppy disk drive.
Appendix A The Error Codes
English 49