Managing Smart Cards - HP Brio BA200 User Manual

Windows NT 4.0
Windows 2000
CAUTION

Managing Smart Cards

This section describes smart card management tasks, not already
covered in chapter 3, Setting up HP ProtectTools 2000. These tasks
include:
Changing a smart card's PIN
•
Backing up a smart card
•
Restoring a smart card from the recovery file
•
(for example, when a smart card is lost or stolen, or the user forgets
their PIN)
Restoring a smart card when you do not have a recovery file
•
(or when you have forgotten the recovery file password).
Tasks that can be performed by a Windows NT/Windows 2000
administrator:
Adding accounts to a smart card
•
Removing accounts from a smart card
•
Changing an account password
•
Do NOT change any user' s Windows NT/Windows 2000 password
remotely. Doing this would make the user's smart card unusable, since
it still contains the old password.
All Windows NT/Windows 2000 password changes should be done using
the user's smart card (refer to page 66 for instructions).
4 Managing Security and Smart Cards
Managing Smart Cards
61