Updating The Pc's Bios (Omnibooks Only) - HP Brio BA200 User Manual

CAUTION
3 Setting up HP ProtectTools 2000

Updating the PC's BIOS (OmniBooks Only)

Updating the PC's BIOS (OmniBooks Only)
For an OmniBook 900 or 4150 with a BIOS version earlier than 2.20, or
for an OmniBook with a Smart Card BIOS available on the OmniBook
website,
www.hp.com/omnibook
security features. To determine your BIOS version, reboot the
computer and press
BIOS Setup shows the BIOS version.
Skip these steps if your BIOS is a Smart Card BIOS or if none is
available for your model.
To update your BIOS:
1 Insert the ProtectTools 2000 CD-ROM in your Omnibook's CD-ROM
drive.
2 Start Windows Explorer and run
3 In the Smart Card Setup window, click the "Smart Card BIOS
Update" option.
Your OmniBook must be on AC power during BIOS update because a
power loss could completely disable your PC.
4 Follow the displayed instructions to create a BIOS update floppy and
update the BIOS.
38
, update the BIOS to support BIOS
when you see the HP logo—the first screen of
F2
setup.exe
.