HP Brio BA200 User Manual page 26

2 Installing HP ProtectTools 2000 Software
Software Installation Procedure
7 Plug in the smart card reader to the PC's keyboard connector and a
free serial port.
8 Restart the PC.
9 To install the Smart Card Reader Driver under Windows 2000,
Windows 2000
provide the following path when prompted by the system so that it
can find the correct driver:
CD-ROM drive).
10 Install HP Smart Card Diagnostics from the ProtectTools 2000
installation screen. If you want to install this component manually
from the CD-ROM, go to the
the setup program setup.exe.
11 Install the HP Smart Card Security System from the ProtectTools
2000 installation screen. The accompanying documentation (this
manual) is installed at the same time. If you want to install the HP
Smart Card Security System manually from the CD-ROM, go to the
hpscss
12 Restart the PC.
13 Run HP Smart Card Diagnostics to check that all software has been
installed correctly (refer to "Using HP Smart Card Diagnostics" on
page 75).
26
D:\hpscr\win2k
folder, then double-click on the setup program setup.exe.
(where
folder, then double-click on
scrdiag
is the PC's
D