Installing The Drivers, Software And Reader (Hp Notebook Pcs) - HP Brio BA200 User Manual

NOTE
Windows 95
Windows 98
Windows 2000

Installing the Drivers, Software and Reader (HP Notebook PCs)

The following steps describe how to install ProtectTools 2000 on H H H H P P P P
N N N N o o o o t t t t e e e e b b b b ook ook ook ook P P P P C C C C s s s s on which no smart card software is installed and no smart
card reader is connected.
Installation on Windows 95 and Windows 98 Systems
1 Insert the HP ProtectTools 2000 CD-ROM in your PC's CD-ROM
drive. If your CD-ROM drive is configured to "autorun", the
ProtectTools 2000 installation screen will appear automatically. If
this screen does not appear, use Windows Explorer to browse the CD
contents and double-click the file setup.exe in the root directory to
run the installation.
2 Select 'Smart Card Reader Driver' from the ProtectTools 2000
installation screen. This will install the GPR400 reader driver and the
Smart Card Base Components in one step.
3 Shut down the PC.
4 Plug the smart card reader into the PC card slot in the computer.
5 Restart the PC.
6 Windows will detect the GPR400 reader and install the necessary
driver.
7 Restart the PC.
8 Install the HP Smart Card Security System from the ProtectTools
2000 installation screen. The accompanying documentation (this
manual) is installed at the same time. If you want to install the HP
Smart Card Security System manually from the CD-ROM, go to the
folder, then double-click on the setup program setup.exe.
hpscss
9 Restart the PC.
Installation on Windows 2000 Systems
1 Log on as an administrator.
2 Plug the smart card reader into the PC card slot in the computer.
Windows will automatically detect the GPR400 reader and install the
necessary driver.
2 Installing HP ProtectTools 2000 Software
Software Installation Procedure
27