Preparing A Smart Card For Use: Overview - HP Brio BA200 User Manual

Windows NT 4.0
Windows 2000
Windows NT 4.0
Windows 2000
NOTE
3 Setting up HP ProtectTools 2000

Preparing a Smart Card for Use: Overview

Preparing a Smart Card for Use: Overview
Before starting, you will need:
Access to a PC that has the ProtectTools 2000 reader and software
•
installed.
The user's account information (username, password, domain
•
name).
An uninitialized smart card.
•
To prepare a smart card for use:
1 Initialize the smart card (refer to page 37).
2 Add the person's name (or identifier) and a PIN.
(Once set, the smart cardholder name or identifier cannot be
changed. However, the user can change the smart card's PIN if
desired.). See "PIN Numbers" on page 13 for more information.
3 Add all the required accounts to give the user access to the required
machines.
4 Create a recovery file on a floppy disk and save it in a safe place (HP
strongly recommends you do this). Refer to page 41.
5 If needed, create a backup smart card and store it in a safe place.
If you need to create backup smart cards, make sure that the
option is set to
Removal
50.
These steps are described in detail in the following pages.
36
. For more information, refer to page
Continue
On Card