Installing The Drivers, Software And Reader (Hp Desktop Pcs) - HP Brio BA200 User Manual

NOTE
Windows NT 4.0
Windows 2000
Windows 95
Windows 98
Windows NT 4.0
Windows 2000

Installing the Drivers, Software and Reader (HP Desktop PCs)

The following steps describe how to install ProtectTools 2000 on H H H H P P P P
D D D D e e e e s s s s k k k k t t t t o o o o p p p p P P P P C C C C s s s s on which no smart card software is installed and no smart
card reader is connected.
Take care when following these instructions as different procedures
apply for different operating systems.
1 If you are installing ProtectTools 2000 on a PC running Windows NT
4.0 or Windows 2000, log on as Administrator.
2 Insert the HP ProtectTools 2000 CD-ROM in your PC's CD-ROM
drive. If your CD-ROM drive is configured to "autorun", the
ProtectTools 2000 installation screen will appear automatically. If
this screen does not appear, use Windows Explorer to browse the CD
contents and double-click the file setup.exe in the root directory to
run the installation.
3 Install the Smart Card Base Components from the ProtectTools 2000
installation screen. If you want to install these components manually
from the CD-ROM, go to the
folders, then (where applicable) the folder corresponding to your
language, then double-click on the setup program scbase.exe.
Restart the PC.
4 Go directly to step 7 if your PC is running Windows 2000. Windows
2000 requires a different driver installation procedure than other
operating systems.
5 Install the Smart Card Reader Driver from the ProtectTools 2000
installation screen. If you want to install this component manually
from the CD-ROM, go to the
setup program setup.exe.
6 Shut down the PC.
2 Installing HP ProtectTools 2000 Software
Software Installation Procedure
Microsoft/scbase
folder, then double-click on the
hpscr
and
/scbaseu2
25