Before You Begin; System Requirements (Hp Desktop Pcs); System Requirements (Omnibook Notebook Pcs) - HP Brio BA200 User Manual

Before You Begin

System Requirements (HP Desktop PCs)

The minimum system requirements are:
One free 9-pin serial port
•
(If you do not have a free serial port, you can order the
HP Serial/Parallel Interface Card D7503A/T)
Windows 95 OSR2, Windows 98, Windows NT 4.0 or Windows 2000.
•
Windows NT 4.0 Service Pack 4 or later is required. Windows NT 4.0
•
Windows NT 4.0
Service Pack 6a is provided on the ProtectTools 2000 CD-ROM
Approximately 20 MB of free hard disk space (not including the
•
space required if you need to install Windows NT 4.0 Service Pack
6a).

System Requirements (OmniBook Notebook PCs)

The minimum system requirements for OmniBooks are:
An OmniBook 900 or 4150 or later with Window s95 OSR2,
•
Windows 98, Windows NT 4.0 or Windows 2000 (a Smart Card BIOS
is included), or
An OmniBook XE2 with Windows 98 or Windows 2000. BIOS
security features are not supported. Future models may support
other operating systems and BIOS security.
A CD-ROM drive installed in your OmniBook or available via a
•
network (on certain OmniBook models the CD-ROM drive is an
option that must be purchased separately).
One free PCMCIA slot
•
Windows NT 4.0 Service Pack 4 or later is required. Windows NT 4.0
•
Windows NT 4.0
Service Pack 6a is provided on the ProtectTools 2000 CD-ROM
At least 7 megabytes of free hard disk space.
•
1 Introduction to HP ProtectTools 2000
Before You Begin
15