Table of Contents
Advertisement
About your projector
Remote control
Front
1
2
3
4
5
6
7
8
9
10
1
Power < v / b > button
Sets the projector to the state where the projector is turned
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
Sets the projector to projection mode when the power is switched
off (standby mode).
2
Remote control indicator
Blinks if any button in the remote control is pressed.
3
<MENU> button/<RETURN> button/<ENTER> button/ asqw
buttons
Used to navigate through the menu screen. ( x page 58)
asqw buttons are also used to enter the password in
[SECURITY] or enter characters.
4
<VOL-> button/<VOL+> button
Adjusts the volume of audio output. ( x page 52)
5
<DEFAULT> button
Resets the content of the sub-menu to the factory default.
( x page 59)
6
Input selection buttons (<HDMI 1>, <HDMI 2>, <DIGITAL
LINK>, <COMPUTER 1>, <COMPUTER 2>, <VIDEO>)
Switches the input signal to project. ( x page 48)
7
Number (<0> - <9>) buttons
Used for entering an ID number or a password in a multiple
projector environment.
8
<ON SCREEN> button
Switches the on-screen display function on (display) or off (hide).
( x page 52)
9
<ID ALL> button
Used to simultaneously control all the projectors with a single
remote control in a multiple projector environment. ( x page 28)
10 <ECO> button
Displays the setting screen relating to ECO management. ( x
pages 55, 95)
Attention
f Do not drop the remote control.
f Avoid contact with liquids or moisture.
f Do not attempt to modify or disassemble the remote control.
24 - ENGLISH
Chapter 1 Preparation — About your projector
11
4
12
15
16
17
13
18
14
19
20
21
11 <AUTO SETUP> button
Automatically adjusts the image display position while projecting
the image.
[PROGRESS] is displayed while in automatic adjustment.
( x page 53)
12 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
( x page 54)
13 <TEST PATTERN> button
Displays the test pattern. ( x page 54)
14 <ID SET> button
Sets the ID number of the remote control in a multiple projector
environment. ( x page 28)
15 <SCREEN ADJ> button
Used to correct the distortion of the projected image. ( x pages
53, 71)
16 <FREEZE> button
Used when pausing the image and turning off the audio.
( x page 52)
17 <CEC> button
Displays the HDMI-CEC operation screen. ( x page 110)
18 <STATUS> button
Displays the projector information.
19 <SHUTTER> button
Used when temporarily turning off the image and audio.
( x page 51)
20 <MUTE> button
Used when temporarily turning off the audio. ( x page 51)
21 <ASPECT> button
Switches the aspect ratio of the image. ( x page 54)
22 Remote control signal transmitter
23 (Not available with this projector)
Top
22
Bottom
23
Advertisement
Table of Contents
