Table of Contents
Advertisement
[Authentication set up] page
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1
[Auth]
Select the authentication method specified by your Internet
service provider.
2
[SMTP Auth]
Set when the SMTP authentication is selected.
3
[POP server name]
Enter the POP server name.
Allowed characters:
Alphanumerics (A - Z, a - z, 0 - 9)
Minus sign (-) and period (.)
4
[User name]
Enter the user name for the POP server or the SMTP server.
[ECO management set up] page
Settings related to the ECO management function of the projector can be made.
Click [Detailed set up] → [ECO management set up].
1
[OPERATING MODE]
Select the [OPERATING MODE] setting.
2
[AUTO POWER SAVE]
Set [ON] when setting [AMBIENT LIGHT DETECTION] and [NO
SIGNAL LIGHT-OUT].
3
[AMBIENT LIGHT DETECTION]
Enables ([ON])/disables ([OFF]) the ambient light detection
function.
Note
f For details of each setting item, refer to the [PROJECTOR SETUP] menu of the projector → [ECO MANAGEMENT].
142 - ENGLISH
Chapter 5 Operations — Web control function
5
[Password]
Enter the password for the POP server or the SMTP server.
6
[SMTP server port]
Enter the port number of the SMTP server.
(Normally 25)
7
[POP server port]
Enter the port number of the POP server.
(Normally 110)
8
[Submit]
Update the settings.
4
[NO SIGNAL LIGHT-OUT]
Select the duration until the light source is turned off when the no
signal light-out function is used.
5
[NO SIGNAL SHUT-OFF]
Select the duration until the standby mode is entered when the no
signal shut-off function is used.
6
[Submit]
Updates the setting.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
Advertisement
Table of Contents
