Table of Contents
Advertisement
Chapter 3 Basic Operations — Operating with the remote control
Operating with the remote control
Using the shutter function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to
turn off the image and audio temporarily.
button
1)
Press the <SHUTTER> button.
f The image and audio disappear.
2)
Press the <SHUTTER> button again.
f The image and audio reappear.
Note
f The power indicator <ON (G)/STANDBY (R)> will blink green slowly while the shutter function is in use (shutter: closed).
f The fade-in/fade-out time of the image can be set by the [DISPLAY OPTION] menu → [SHUTTER SETTING].
f To output audio while the shutter function is in use (shutter: closed), set the [PROJECTOR SETUP] menu → [AUDIO SETTING]
( x page 106) → [IN SHUTTER] to [ON].
f The projector does not have a built-in speaker. Audio is output from the external audio system connected to the <VARIABLE AUDIO OUT>
terminal.
f The light source may be lit dimly due to warm up when the shutter function is used in the operating environment temperature of around 0 °C
(32 °F).
Using the mute function
Audio can be temporarily turned off.
button
1)
Press the <MUTE> button.
f The audio is muted.
2)
Press the <MUTE> button again.
f The audio is turned on.
ENGLISH - 51
Advertisement
Table of Contents
