Table of Contents
Advertisement
Note
f The self-diagnosis display and the details of the malfunction may be different.
f For errors and warnings that are not described in the table, consult your dealer.
r Measure for error and warning
Action
number
1
The operating environment temperature is too high. Use the projector in an appropriate operating environment temperature
2
The operating environment temperature is too low. Use the projector in an appropriate operating environment temperature
3
Battery replacement is required. Consult your dealer.
4
If the display does not clear after switching the main power off and on, consult your dealer.
The light source has failed to turn on. If the light source does not light up after turning the power off and on, consult your
5
dealer.
*1 The operating environment temperature of the projector differs depending on the altitude or the setting of the [PROJECTOR SETUP] menu → [ECO
MANAGEMENT] → [OPERATING MODE]. Refer to "Operating environment temperature" ( x page 180) for details.
164 - ENGLISH
Chapter 6 Maintenance — [SELF TEST] indications
Measure
*1
.
*1
.
Advertisement
Table of Contents
