Table of Contents
Advertisement
[Basic control] page
Click [Projector control] → [Basic control].
1
[POWER]
Turns off/on the power.
2
[SHUTTER]
Switches whether to use the shutter function (enabled (shutter:
closed)/disabled (shutter: open)).
3
[OSD]
Switches off (hide)/on (display) the on-screen display function.
[Detail control] page
Click [Projector control] → [Detail control].
1
2
3
4
5
1
Control of the projector
The projector is controlled by clicking the buttons in the same way
as the buttons on the remote control. After control, the on-screen
display of the projector at the right of the control page is updated.
2
[SUB MEMORY]
Switches the sub memory.
3
[DAYLIGHT VIEW]
Switches the day light view setting.
4
[FREEZE]
Temporarily pauses the image.
5
[WAVEFORM MONITOR]
Displays the waveform of the input signal.
6
[MUTE]
Switches whether to use the mute function.
7
[TEST PATTERN]
Displays the test pattern.
138 - ENGLISH
Chapter 5 Operations — Web control function
4
[SYSTEM]
Switches the system method.
5
On-screen display of the projector
Displays the same items as shown on the on-screen display of
the projector. You can check or change the settings of the menus.
It is displayed even if the on-screen display function is set to off
(hide).
6
[INPUT SELECT]
Switches the input signal.
8
[GET OSD]
Updates the on-screen display of the projector at the right of the
control page.
1
2
3
4
5
6
6
7
8
Advertisement
Table of Contents
