Table of Contents
Advertisement
7)
Press asqw to select a character, and press the <ENTER> button.
f Enter the current password.
8)
After entering the password, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
9)
Press as to select [USER NAME] under [NEW], and press the <ENTER> button.
f The [USER NAME] screen is displayed.
10) Press asqw to select a character, and press the <ENTER> button.
f Enter a new user name.
f Enter the current user name if you do not want to change it.
f Up to 16 characters can be entered.
11) After entering the user name, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
12) Press as to select [PASSWORD] under [NEW], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
13) Press asqw to select a character, and press the <ENTER> button.
f Enter a new password.
f Up to 16 characters can be entered.
f Enter the current password if you do not want to change it.
14) After entering the password, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
15) Press as to select [PASSWORD CONFIRM] under [NEW], and press the <ENTER> button.
f The [PASSWORD CONFIRM] screen is displayed.
16) Enter the password entered in Step 13).
17) After entering the password, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
18) Press as to select [STORE], and press the <ENTER> button.
f The confirmation screen is displayed.
19) Press qw to select [OK], and press the <ENTER> button.
Note
f For restrictions on character strings that can be set for password, refer to [PASSWORD POLICY] ( x page 140) .
f The user name and password of the administrator account can also be changed on the "[Set up password] page (for administrator account)"
( x page 177) of the web control screen.
f The user name and password of a standard user account without administrator rights can be set on the "[Set up password] page (for
administrator account)" ( x page 176) of the web control screen.
[NETWORK SECURITY]
Make settings to protect the projector from external attacks via LAN and unauthorized use.
Setting the password of the administrator account ( x page 140) is required for using the network function of the
projector.
[COMMAND PROTECT]
Make settings for the connection authentication when using the command control function.
1)
Press as to select [NETWORK SECURITY].
2)
Press the <ENTER> button.
f The [NETWORK SECURITY] screen is displayed.
3)
Press qw to switch the [COMMAND PROTECT] setting.
142 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Advertisement
Table of Contents
