Table of Contents
Advertisement
Adjusting distortion with [FREE GRID]
1)
Press as to select [GEOMETRY].
2)
Press qw to select an item other than [OFF].
3)
Press the <ENTER> button.
f The screen for the selected item is displayed.
4)
Press as to select [FREE GRID].
5)
Press qw to select an item.
f The items will switch each time you press the button.
[OFF]
[ON]
f Proceed to Step 6) when [ON] is selected.
6)
Press the <ENTER> button.
f The [FREE GRID] screen is displayed.
7)
Press as to select [GRID RESOLUTION].
8)
Press qw to switch the item.
f The items will switch each time you press the button.
[2x2]
[4x4]
[8x8]
[16x16]
9)
Press as to select [CONTROL POINTS].
10) Press qw to switch the item.
f The items will switch each time you press the button.
[POINT]
[HORIZONTAL LINE]
[VERTICAL LINE]
11) Press as to select [GRID WIDTH].
12) Press qw to switch the item.
f The items will switch each time you press the button.
[1] - [10]
13) Press as to select [GRID COLOR].
14) Press qw to switch the item.
f The items will switch each time you press the button.
Chapter 4 Settings — [POSITION] menu
Disables the adjustment to be performed with [FREE GRID].
Enables the adjustment to be performed with [FREE GRID].
Performs the adjustment using the pattern of the outer border (there are two lines each vertically and
horizontally as a grid line).
Performs the adjustment using the grid pattern divided into three in the horizontal direction and also in
the vertical direction.
Performs the adjustment using the grid pattern divided into seven in the horizontal direction and also
in the vertical direction.
(Factory default setting)
Performs the adjustment using the grid pattern divided into 15 in the horizontal direction and also in
the vertical direction.
Select this item when adjusting by selecting one intersection from the intersections on the grid lines.
Select this item when selecting all the intersections on one horizontal grid line, and adjusting them
simultaneously.
Select this item when selecting all the intersections on one vertical grid line, and adjusting them
simultaneously.
Select the width of the grid line. It can be set between 1 line to 10 lines.
(Factory default setting: [5])
ENGLISH - 81
Advertisement
Table of Contents
